| Project | Exterior, Waterproofing |
|---|---|
| Available sizes | 1mtr x 10mtr, 200mm x 10mtr |
| Guarantee | N/A |
| Type | Preparation, Waterproofing, Exterior |
Additional information
Features & Benefits
- It is used to increase tensile and add strength to moving jointsand flashings.
Product Information
- Style code: L0055 – SS00
COMPOSITION - Warp Description: EC9-34Z20 Yarn x 2
- Weft Description: EC9-68Z20 Yarn
FABRIC CONSTRUCTION - Warp Ends/cm: 4.0 (±0.2 Ends/cm)
- Weft Picks/cm: 4.0 (±0.2 Picks/cm)
PHYSICAL PROPERTIES - Weave Pattern: Leno
- Warp Tensile Strength: 10kN/m (Typical)
- Weft Tensile Strength: 10kN/m (Typical)
- Warp Elongation: <3.5%
- Weft Elongation: <3.5%
- Thickness: N/A
- Thermal Capacity: N/A
- Ave Mass: 66 g/m2 (±5.5%)
- Coating: Alkaline Resistant Polymer
Application Details
- It is extremely important to fully saturate the DURAMESH from seam to seam and edge to edge.
- Any exposed DURAMESH that does not receive sufficient coating will not form a water-tight membrane and will wick moisture and not cure out.
- If the applicator is unable to completely wet out the DURAMESH he must apply an additional coat to seal the
surface. - If the DURAMESH is not thoroughly wet out and cured, and does wick in some moisture, it is very unlikely that it will dry out underneath the membrane. It will feel dry to the touch on the surface but there will be moisture trapped underneath and cause problems with the topcoat.
