Low odour premium quality non-drip, water based enamel for interior and exterior application with a smooth satin finish that is ideal for areas with high humidity, condensation and grease caused by cooking, and frequent washings.
Stevensons Architect Kitchen & Bathroom
Premium Non-Drip Water Based Enamel
Additional Information
Project Type
Interior, Kitchen & Bathroom
Available sizes
1L, 5L
Guarantee
15 Years
Product Type
Acrylic
Features & Benefits
Dries to a tough wall coating and a hard wearing finish
Virtually no odour
Non-yellowing
Turpentine free clean-up: wash brushes and rollers in water
Quick drying – 2 coats can be applied in one day
Stain and steam resistant and easily cleaned
Interior and exterior use
Product Information
Type: Water based Adhesion promoted Pure Acrylic containing mould and mildew resistant additives
Appearance: Satin Finish
Colours: White
Tint Bases: Pastel, Deep, Transparent
Solid Approx.: 62% by mass; 46% by volume
S G at 23 °C: Approx.: 1,39
Flash point: Non-flammable
Theoretical spreading rate: 8-12m²/? per coat
Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
Application Details
Mixing: Stir thoroughly with a flat paddle
Method: Brush, roller or spray
Thinning: Not recommended – ready for use
Cleaning: Water
Drying time: 4 Hours
Recoating time: 4 Hours
Application: Apply a minimum of two coats