| Project | Exterior, Metal Primer, Steel Surfaces |
|---|---|
| Available sizes | 1L, 20L, 5L |
| Guarantee | N/A |
| Type | New & weathered mild steel, galvanised iron, chromadek, aluzinc & IBR. |
Metalrite
Metalrite Coast Primer MR200
This is an anti-corrosive acid etch primer for all clean galvanised iron and non-ferrous metals.
Additional information
Features & Benefits
- For coastal & inland conditions
- Excellent anti-rust primer
- Excellent durability & adhesion
- For new & weathered mild steel, galvanised iron, chromadek, aluzinc & IBR.
- Quick dry to a hardwearing primer
- Interior and exterior use
Product Information
- Type Modified alkyd based with Zinc
- Phosphate pigment
- Appearance Matt finish
- Colours Black
- Solids Approx. 51% by mass; 39% by volume
- SG at 23oC Approx: 1.35
- Theoretical spreading rate ±8-10m2/l depending on surface porosity. This serves as a guide only.
- Practical spreading rate The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used.
Application Details
-
Mixing: Stir thoroughly with a flat paddle before use
-
Method: Brush, roller or spray
-
Thinning: Not recommended - Ready for use
-
Cleaning: Enamel thinners
-
Drying time: Touch dry - 30min (extend during cold, wet or humid conditions)
-
Recoating time: 1 hour - not longer than 48 hours
-
Application: Apply a minimum of two coats
